Description
CERABIEN™ ZR
CZR (Cerabien ZR) is a porcelain system for making all ceramic crowns in use
with zirconia frameworks. Single crown made from CZR with zirconia can be
used in the posterior as well as anterior due to its extremely high exural
strength. The combination of CZR and zirconia will give you enhanced
esthetics and fit with maximum strength for an overall superior restoration.
strength for an overall superior restoration.
Contraindications: If the patient is hypersensitive to potassium-aluminosilicate glass or any other components, this product must not be used.
Caution and Warning:
1. If the patient or the dental professional demonstrates a hypersensitivity reaction, such as rash, dermatitis, etc., discontinue use
of the product and seek medical attention immediately.
2. When mixing materials, or grinding a restoration being fabricated, use an approved dust mask and vacuum with an air filter to
protect your lungs from inhaling either dust or liquid.
3. When mixing materials, or grinding a restoration being fabricated, use safety glasses to prevent dust or liquid from getting into
your eyes. If dust or liquid gets into your eyes, immediately rinse with copious amounts of water and seek medical attention.
4. Do not use for any purposes except for fabricating dental restorations. This product is for dental application only.
5. The restoration is very hot immediately after baking. Do not touch it with your bare hands for a considerable amount of time after
removing it from the furnace.
6. FC Paste Stain, IS LIQUID and ES LIQUID are flammable. Do not use them near fire or high-temperature objects.
7. IS LIQUID is a stimulant liquid. When using it, have good ventilation and if necessary, wear a protective mask, safety glasses and
gloves.
8. Stains and plaque can accumulate on a restoration, once it has been put in position in the patient’ s oral cavity, depending on the
patient's eating habits or food choices. Instruct patients about the importance of cleaning their restorations.
Precautions in use:
1. When using a porcelain furnace for the first time, perform a baking test run in advance, since the working temperatures of
porcelain furnaces may vary from one device to another.
2. Use only the product with the LIQUIDs named in the Technical Instructions; otherwise, the restoration might change color when it
is baked.
3. Do not mix the product with any dental porcelain other than the product or use it in unauthorized combinations. CZR PRESS LF
and CZR PRESS may be used with the product if they are used according to the procedures stated in their respective
Instructions for Use.
4. Do not use Internal Stain as an alternative to External Stain. Do not use External Stain or FC Paste Stain as an alternative to
Internal Stain.
5. Do not apply External Stain over FC Paste Stain.
6. Do not mix External Stain with FC Paste Stain. You may mix Internal Stain shades with each other, or External Stain shades with
each other, or FC Paste Stain shades with each other, when making color adjustments.
7. FC Paste Stain may be used for restorations fabricated using CERABIEN™ ZR or CZR PRESS. For detailed information, see the
FC Paste Stain Technical Instructions.
8. If the FC Paste Stain in the container has any precipitate at the bottom, stir before use until the contents are uniformly mixed,
taking care not to entrap any air bubbles.
9. When adjusting the viscosity of FC Paste Stain, dispense the required amount of FC Paste Stain from the container and mix ES
LIQUID with it until you obtain the desired consistency. Do not put the ES LIQUID directly into the FC Paste Stain container.
10. Do not use Margin MRP or Add-on for additional build-up if you are following the C or D directions for use in the Instructions for
Use; otherwise, too much luster will be developed.
Storage:
1. The product must be stored in a cool and dry place. Keep away from direct sunlight.
2. The product should be stored at 1-30ºC(33.8~86ºF).
3. After using FC Paste Stain, wipe any remaining paste off the rim of opening of the container and tighten the cap securely to
prevent the contents from drying out.
4. The product must be stored in an appropriate place where only dental personnel have access.
5. The product must be used by the expiration date indicated on the package.
6. Do not store FC Paste Stain, IS LIQUID and ES LIQUID near fire or high-temperature objects.
Webáruházunk árai eltérhetnek a szaküzletünkben lévő áraktól!
Ceramic packaging | 3g |
Leplezés anyag | Internal stain |
Kiszerelés | 3 g |
Product line | CERABIEN ZR |
Ceramic shades | Mamelon Orange 2 |